Parking Brake Cables

3/16" PBT Parking Brake Cables

Minimum bend radius: 7"
Load rating: 3,000 lbs

Construction diagram for 3/16 PBT brake cable assemblies.

Brake Cable Builder

Build a visual brake cable configuration

Work left to right through the cable. The diagram updates as you choose strand ends, conduit fittings, dimensions, spring, hose, and hardware.

Optional Spring

3/16" PBT

L1 - conduit fitting to fittinginches

L2 - strand end to endinches

Use inches as the primary unit. Fractional inch entries are fine; final manufacturability will be confirmed by Custom Control Cables.

Additional hardware

Rod nut quantityHub nut quantityClamp quantityClip quantityE-ring quantity

Optional abrasion protection hose over conduitSelect this if the parking brake cable needs extra abrasion protection over the conduit.

Application notes

Notes or application details

Review

Custom Parking Brake Cable, 3/16" PBT

Product category: Parking Brake
Product type: Brake Cable
Cable size: 3/16" PBT
L1: Not selected
L2: Not selected
Left strand end fitting: Not selected
Left conduit end fitting: Not selected
Right conduit end fitting: Not selected
Right strand end fitting: Not selected
Optional hose: Not selected
Optional hose length: Not selected
Optional spring: Not selected
Additional hardware:
  Rod nuts: 0
  Hub nuts: 0
  Clamps: 0
  Clips: 0
  E-rings: 0
Application notes: Not selected
Warnings: Left strand end fitting is required. | Left conduit fitting is required. | Right conduit fitting is required. | Right strand end fitting is required. | L1 dimension is required. | L2 dimension is required.

Left strand end fitting is required.

Left conduit fitting is required.

Right conduit fitting is required.

Right strand end fitting is required.

L1 dimension is required.

L2 dimension is required.